• PC Windows 2000 or higher (not included)
• CPU: Pentium III 800 MHz
• 128 MB RAM
• 20 GB HDD
• CD / CD-R / CD-RW writer
• W-LAN (TCP/IP) or USB 1.1 or 2.0
• Modem, for extended communication
• Available also the Stand-Alone Version, with basic shade analysis functionalities
General information:
• Power supply: rechargeable Li-Ion batteries
• Stand by time: 2 hrs
• Battery charger: 115V 60Hz / 230V 50Hz
• Environment temperature: 10°C – 35°C
• Air humidity: 30% – 80%
• Dimensions: (HxWxD) 21 x 16 x 11 cm
• Weight: 900 grams
• USB 1.1 or 2.0
• W-LAN 11 Mbits
• SD Memory Card 128 MB
• Microphone
• The software is available in English, Italian, German, French and Spanish
Type of instrument: Spectrophotometer
Spectral data:
• Light output: from about 410nm to 680nm
• Image output: calibrated data from 400nm to 720nm in increments of 10nm
Measurement data:
• Illumination 2 x 45°, polarized, telecentric, monochromatic
• Readings at 0°, polarized, telecentric
• Reading area: ~18x14mm on 640x480 points
• Digital Resolution: 640x480 = 307.200 (=N° of spectral curves)
• Optical resolution: ~0,03x0,03mm for each point
• Repeatability: better then dE of 0.5 on teeth
• Inter instrument agreement: better then dE of 1 on teeth
Sensors: CCD Black and White sensor (for spectrum data readings)
Standards:
• Safety: EN 61010-1
• EMC : EN 61326-1
• EU Dir.: 72/23/CEE + 89/336/CEE
Patents:
• US Patent 6.038.024
• US Patent 5.798.839
• Patent pending N° 01276/04
